SRL Webbing Snap Hook 6 FT LE
In Stock
SKU
SRWV845523006LE
PeakWorks - Self Retracting Lifeline with Webbing, Snap Hook - 6 FT - Leading Edge
Features and Benefits:
- Color: Black
- Capacity (lb.): 300 lb
- Anchor Hook Material: Steel
- Anchor Hook Type: Snap Hook
- Body Hook Type: Carabiner
- Average Arrest Force: 765 lbf (3.4kN)
- Class Type: A
- Gate Opening (in.): 0.75"
- Housing Material: Aluminum
- Leading Edge: Yes
- Leg Type: Single
- Length (ft.): 6'
- Maximum Total Arrest Distance - Non-Leading Edge application (in.): 24"
- Maximum Total Arrest Distance - Non-Leading Edge application (in.): 24"
- Minimum Fall Clearance - Non-Leading Edge application (ft.): 6'
- Minimum Fall Clearance - Leading Edge application (ft.): 13'
- Minimum set back distance from edge - Leading Edge application (in.): 12"
- Webbing/Cable Width (in.): 1"
- Certification: CSA Z259.2.2-98 Type 2|LE certified|ANSI Z359.14-2014, Class A
- Lifeline Material: Dyneema®
- Rescue and Recover - SRL-R: No
- Special Features: Sewn-in Indicator|Lightweight
- SELF-RETRACTING DEVICE LE (SRD LE)�CLASS A� Single Leg Webbing SRL-LE. SRL's that are Leading Edge certified can be used in both overhead and Leading-Edge applications. What is a Leading Edge? - A leading edge can be described as any sharp edge commonly found on a worksite, with which a cable or webbing connection could come into direct contact during a fall. There is considerable force at play during a fall, and a non-Leading-Edge SRL (cable or webbing) may cut or snap at a sharp edge during the fall
- Leading Edge (LE) self-retracting lifelines are designed to protect the worker when operating near an edge and where a fall hazard exists that could cause the lifeline to come into contact with the edge, for example when working over structural steel or in high-rise concrete buildings under construction with open flooring. An SRL Leading Edge (LE) device is an SRL that has enhanced design features for use in leading edge applications
- it provides additional protection against the sharp or abrasive surfaces found on many construction sites and can withstand a fall over a leading edge.
- Tested and approved for foot level tie-off.
- Dyneema® webbing lifeline has been sharp edge tested over a .005" radius sharp edge. PeakWorks webbing SRL�s are manufactured using special 0.1" (2.5 mm) thick, 1" (25 mm) wide Dyneema® Core materials, giving them one of the highest performances of this type of fiber in the world. The webbing features a sewn-in indicator on the lifeline itself for maximum safety.
- Lightweight Aluminum housing. 1" Webbing, 6 ft. working length. LE minimum fall clearance: 13 ft. (4m). Hook opening: 0.75” Snap Hook. Weight Capacity: 300 lbs.
- Class A rating means the fall distance is less than 2 ft. (0.6m) or less when connected overhead (non-LE application). Leading edge minimum fall clearance of 13 ft. (4m) required.
At PeakWorks, we design and manufacture superior fall protection products that are easy to use andcomfortable to wear. Backed by leading industry experts, PeakWorks is dedicated to uncompromising quality to keep you working safely at any height. Tackle the job comfortably and confidently with PeakWorks innovative fall protection solutions.
More Information
| Brand | Surewerx USA |
|---|